PRODUCTS
ACRIL FASAD – Water-Emulsion Facade Paint
Ideal for painting both the facade and interior of buildings. Suitable for any mineral, plaster surface, and wood. Ensures high vapor permeability, low water absorption, and water resistance.
Anti-Corrosive (Anti-Rust) Paint
Suitable for both interior and exterior use. Ideal for painting iron, tin, high-pressure gas and water pipes, as well as wooden surfaces.
Aqua Block
PRODUCT DESCRIPTION: An acrylic copolymer resin-based, water-based, single component, ready-to-use, elastic, white (colorable) waterproofing spread material that can be applied on all types of surfaces easily.
APPLICATION SURFACES: Can be used on indoor or outdoor horizontal and vertical surfaces like flat and inclined roofs, terraces, balconies, pools and water tanks, corners of gutters, eaves and chimneys, and concrete, plaster, brick, zinc, galvanized and briquette surfaces.
APPLICATION: Apply on humid-free, dry and clean surfaces. Clean the application surface from all kinds of grease, dirt, dust and loose materials preventing adhesion of the product. Apply two coats of not-thinned coat over the primer (Ensure the application is minimum two coats.) Apply Aquablock in stripes at horizontal and vertical joints. Apply Aquaset in a temperature between +5 °C and +35°C especially during dry air. Avoid applications in weather conditions like rain, snow and frost. Protect the surface from such weather conditions at least for 24 hours after the application.
TECHNICAL VALUES:
First Drying: 12 h / Second Coat: 24 h / Final Drying: 48 h / Density: 1,30 g/ml
Consumption: Vertical:1,33 m2/kg / Horizontal:0,67m2/kg per single coat depending on the structure, smoothness and porosity of the application structure, average consumption.
Lead content does not exceed 90ppm (0,009%).
Aqua Lack
Water varnish made on the basis of acrylic polymer. Features: dissolves in water, does not contain solvents, absorbs well, has a slight odor, washes off.
Varnish application: for any kind of wood, thin and water-dispersed paint treated surface
Protects the wood surface from harmful biological effects and moisture. Use a brush, roller and sprayer. The minimum surface and air temperature should be +5 С. The cost per layer is 120-250 gm square
Shelf life: in closed, dry, cool conditions – 2 years
Lead content does not exceed 90ppm (0,009%).
BETONCONTACT
Composition: acrylic co-polymer, polymer additive, inorganic fillers
Purpose: intended for processing smooth, lightly absorbent surfaces, creating an adhesive-enhancing base layer on ceilings, interior and exterior walls, thus contributing to the strengthening of plaster and plaster.
Instructions for use: The treated surface must be cool, dry, clean, free of moisture and grease stains. Mix well before use. It can be diluted with water in the amount of 10% of the concrete contact weight. Use a roller or a sprayer (layer thickness 1.5 mm). To produce an adhesive layer on dense, smooth, weakly absorbent surfaces, the work must be performed at a temperature of at least +5C. After finishing the work, tools should be washed with warm water.
Lead content does not exceed 90ppm (0,009%).
Dolgu
Product Description: A cellulose-based, fast-drying filler lacquer used for filling pores on all types of MDF, massive wood, and wood veneer surfaces, as well as for preparing a smooth surface for top coatings.
Application: Apply with a brush or sprayer in 2 or 3 thin layers. Wait 5-10 minutes after applying each layer.
Drying Time (at 20°C): Touch-dry: 10-15 minutes / Full drying: 1 hour / Density: 0.94 g/ml.
Technical Specifications: Consumption: 10-12 m²/L per layer. Consumption may vary depending on the type of wood, surface condition, number of layers, and application method.
Ecoleader
Facade (Exterior) Emulsion Paint
Made on the basis of acrylic copolymer, reinforced with siloxane elements.
Features: Water-soluble, solvent-free, easily absorbed, has a minimal odor, washable. It is used for surfaces such as concrete, plaster, stucco, drywall, and decorative coated surfaces.
Application Instructions: The surface must be smooth, dry, clean, and free of dust particles. It is recommended to clean perforated surfaces in advance. For the first coat, dilute the paint with 10% water; for the second coat, dilute with 20% water.
Apply subsequent coats every 6 hours. Use a brush, roller, or sprayer. The minimum temperature of the surface and air should be +5°C. Wash tools immediately after use.
Drying Time: 30 minutes for initial drying, full drying in 24 hours. Approximately 80ml/m² of paint is required for one coat on the painted surface.
Ecoroom
For Interior Walls
Interior emulsion paint made on an acrylic copolymer base.
Features: Water-soluble, solvent-free, easily absorbed, has a minimal odor, and is washable.
Usage: Suitable for all types of concrete, wallpaper, mineral, and painted surfaces.
Application Instructions: The surface must be smooth, dry, clean, and free of dust particles. It is recommended to clean perforated surfaces in advance. For the first coat, dilute the paint with 10% water; for the second coat, dilute with 20% water. Apply subsequent coats every 6 hours. Use a brush, roller, or sprayer for application. The minimum temperature of the surface or air should be +5°C. Wash tools immediately after use.
Drying Time: 30 minutes for initial drying, full drying in 24 hours. Approximately 80ml/m² of paint is required for one coat on the painted surface.
Store in a dry, cool place (non-frozen condition for up to 2 years).
Manufacturer: LLC Color Group, 2022
Address: 1 Gamarjveba, Georgia
The lead content in the product does not exceed 90 ppm (0.009%).
Volume: 15 liters
Parket Lack
Product Description:
A urethane-alkyd resin-based parquet varnish, which provides excellent gloss for floor surfaces. It protects wood from ultraviolet (UV) radiation over a long period without altering the wood’s structure and is resistant to yellowing. The varnish is suitable for both interior and exterior finishes, maintaining a natural appearance for a long time, and is resistant to changing weather conditions, water, and humidity. It is lead-free and comfortable for use not only on floors but on all types of indoor and outdoor wooden surfaces. It serves both decorative and protective purposes.
Usage Instructions:
Clean wooden surfaces from oil, dirt, and paint residues. It is recommended to apply 2 layers, allowing each layer to dry for 6-8 hours. The moisture content of the wood should not exceed 15%. During application, ensure the temperature of the environment and surface is between +5°C and +30°C until the product is fully dry. Protect from freezing.
Apply with a brush, roller, or sprayer.
Technical Specifications:
- Density: 0.93 g/ml
- Consumption: 8-12 m²/L per coat (consumption may vary depending on the type of wood, surface condition, number of layers, and application method).
- Volume: 2.5 liters
POOL PAINT
PRODUCT DESCRIPTION: An acrylic copolymer resin-based, water-based, singlecomponent, ready-to-use, elastic, white (colorable) waterproofing spread material that can be applied on all types of surfaces easily.
APPLICATION SURFACES: Can be used on indoor or outdoor horizontal and vertical surfaces like flat and inclined roofs, terraces, balconies, pools and water tanks, corners of gutters, eaves and chimneys, and concrete, plaster, brick, zinc, galvanized and briquette surfaces.
APPLICATION: Apply on humid-free, dry and clean surfaces. Clean the application surface from all kinds of grease, dirt, dust and loose materials preventing adhesion of the product. Apply two coats of not-thinned coat over the primer (Ensure the application is minimum two coats.) Apply Pool Paint in stripes at horizontal and vertical joints. Apply Pool Paint in a temperature between +5 °C and +35°C especially during dry air. Avoid applications in weather conditions like rain, snow and frost. Protect the surface from such weather conditions at least for 24 hours after the application
TECHNICAL VALUES:
First Drying: 12 h / Second Coat: 24 h / Final Drying: 48 h / Density: 1,30 g/ml Consumption: Vertical:1,33 m²/kg / Horizontal:0,67m²/kg per single coat depending on the structure, smoothness and porosity of the application structure, average consumption.
Lead content does not exceed 90ppm (0.009%).
QUARTZ GRUND
QUARTZ GRUND – is intended for the preparation of mineral surfaces (concrete, brick, cement-sand, gypsum), plasterboard and OSB boards inside and outside and creating a high-adhesion layer before applying silicone decorative plasters. It is recommended to be used in systems of facade thermal insulation from foam plastic or as a temporary independent coating for preservation of external thermal insulation systems in the winter period.
Composition: Water-polymer dispersion, quartz and marble filler, pigments, modifying additives, strengthens the surface and improves adhesion, reduces and makes homogeneous the absorbent capacity of the base, resistant to atmospheric effects and water.
Characteristics: The diluent is water / Consumption 0.25-0.35 kg/m2 / Drying time is 4 to 6 hours
Lead content does not exceed 90ppm (0,009%).
SILIKON – Silicone-Based Facade Water-Emulsion Paint
Perfect for painting the facade and interior of buildings. Compatible with any mineral, plaster surface, and wood. Ensures high vapor permeability, low water absorption, and water resistance.