PRODUCTS
Stone lack glossy
Stone lack – concrete and stone varnish at the base of the acrylic. With a wet stone effect. Used for stone, brick, and concrete surfaces. For both internal and external work.
Properties: Produces hard surface, resistant to weather changes and resistant to ultraviolet rays, resistant to logging and mechanical to the impact, it protects others from stains as much as possible. It is environmentally friendly and does not contain solvent, it dries soon, is soluble in water and odorless.
Surface preparation: The surface should be clean, dry, dust, without traces of oily stains and old paint.
Lead content does not exceed 90ppm (0,009%).
Stone lack matt
Stone lack – concrete and stone varnish at the base of the acrylic. With a wet stone effect. Used for stone, brick, and concrete surfaces. For both internal and external work.
Properties: Produces hard surface, resistant to weather changes and resistant to ultraviolet rays, resistant to logging and mechanical to the impact, it protects others from stains as much as possible. It is environmentally friendly and does not contain solvent, it dries soon, is soluble in water and odorless.
Surface preparation: The surface should be clean, dry, dust, without traces of oily stains and old paint.
Lead content does not exceed 90ppm (0,009%).
Stone lack satin
Concrete and stone varnish at the base of the acrylic. With a wet stone effect. used for stone, brick and concrete surfaces,
For both internal and external work.
Properties: Produces hard surface, resistant to weather changes and resistant to ultraviolet rays, resistant to logging and mechanical to the impact, it protects others from stains as much as possible, It is environmentally friendly and does not contain solvent, it dries soon, is soluble in water And odorless.
surface preparation: the surface should be clean, dry, dust, Without traces of oily stains and old paint.
Lead content does not exceed 90ppm (0,009%).
Super Matt
Interior emulsion paint based on acrylic copolymer
Features: Water-soluble, contains no solvents. Absorbs well, has minimal odor, washable.
Usage: Suitable for any type of concrete, plaster, mineral surfaces, wallpaper, or previously painted surfaces.
Application method: The surface must be smooth, dry, clean, and free from dust particles. It is recommended to pre-clean any punctured surfaces. For the first coat, dilute the paint with 10% water; for the second coat, dilute with 20% water. Subsequent coats can be applied every 6 hours. Use a brush, roller, or sprayer. The minimum surface and air temperature should be +5°C. Clean tools immediately after use. The drying time is 30 minutes, with full drying achieved in 24 hours. For one coat on a painted surface, approximately 80ml/m² is required. Store in a dry, cool place (not in freezing conditions) for up to 2 years.
Ultramarin
Facade (Exterior) Emulsion Paint
Made on the basis of acrylic copolymer, reinforced with siloxane elements.
Features: Water-soluble, solvent-free, easily absorbed, has a minimal odor, washable. It is used for surfaces such as concrete, plaster, stucco, drywall, and decorative coated surfaces.
Application Instructions: The surface must be smooth, dry, clean, and free of dust particles. It is recommended to clean perforated surfaces in advance. For the first coat, dilute the paint with 10% water; for the second coat, dilute with 20% water.
Apply subsequent coats every 6 hours. Use a brush, roller, or sprayer. The minimum temperature of the surface and air should be +5°C. Wash tools immediately after use.
Drying time: 30 minutes for the first phase, full drying in 24 hours. For one coat on the painted surface, approximately 80ml/m² of paint is required.
Yacht Lack
Product Description:
A urethane-alkyd resin-based yacht varnish that provides surface gloss.
Features:
- Protects wood for a long time from ultraviolet (UV) radiation.
- Resistant to yellowing and does not alter the structure of the wood.
- Suitable for both interior and exterior use, maintaining a natural appearance under changing weather conditions, humidity, and water exposure.
- Lead-free, it can be used on wooden surfaces of boats as well as on all types of indoor and outdoor wooden surfaces of buildings for both decorative and protective purposes.
Usage Instructions:
Clean wooden surfaces from oil, dirt, and paint residues. It is recommended to apply 2 layers, allowing each layer to dry for 6-8 hours. The moisture content of the wood should not exceed 15%. Ensure that the environment and surface temperatures during application and until full drying are between +5°C and +30°C. Protect surfaces from freezing.
Apply with a brush, roller, or sprayer.
Technical Specifications:
- Density: 0.93 g/ml
- Consumption: 8-12 m²/L per coat (consumption may vary depending on the type of wood, surface condition, number of layers, and application method).